Product Overview
Where conventional fire detectors reach their physical limits, the SecuriSens ADW 535 line-type heat detector comes into play.
The intelligent line-type heat detector works perfectly, even under the most difficult conditions. Whether the fully automatic monitoring of large areas, resisting corrosive gases, extreme humidity and high temperatures, or differentiating between false alarms and real danger - the list of requirements for a state-of-the-art line-type heat detector is both long and detailed.
Design and function
The integrated SecuriSens ADW 535 line-type heat detector combines a proven functional principle with the latest developments in sensor and processor technology.
A sensing tube filled with normal air is installed in the area to be monitored. A fully electronic pressure sensor permanently records the pressure in the sensing tube. This is monitored constantly in the processing electronics and compared with the alarm criteria. Diverse setting options are offered directly on the device via EasyConfig or using the comfortable ADW Config tool for perfect adaptation to existing environmental conditions. The Dynamic Heat Watch (DHW) technology ensures that a brief temperature increase caused by the ambient conditions does not result in a false alarm.
Applications
Thanks to the extremely tough sensing tube, the SecuriSens ADW 535 can be deployed in many applications where conventional fire detectors do not work. With its long service life and maintenance-free design, the ADW 535 is also ideal in applications where detection properties must remain constant over the entire product service life.
Typical applications:
Tunnels, such as; road tunnels, metro and railway tunnels, utility and cable tunnels
Underground garages, vehicle silos
Food industry, industrial kitchens, large commercial bakeries
Alcohol processing, distilleries
Chemical industry, refineries, oil tanks
Waste incineration plants
Outdoor applications, such as; loading platforms (flying roofs), historical bridges, fuel warehouses, towers
High-temperature applications such as; paint shops, steel plants, kilns, climate chambers, gas turbines, engine test benches
Plus many other applications, e. g. under-floor monitoring in rolling stock, marine applications
Sensing tubes
Depending on the application, various sensing tubes are used (all of which have VdS approval):
- Copper: standard applications, property surveillance
- Stainless steel: food industry and high temperature applications
- PTFE (Teflon): aggressive ambient conditions (e.g. chemical industry)
Integrated line-type heat detector for 1 or 2 sensing tubes (Double Tube Technology)
Based on proven technology
Fastest heat detector with fully programmable response behaviour plus differential and maximal valuation
- Intelligent alarm verification with DHW technology (Dynamic Heat Watch)
- Available as standard and Heavy Duty version (with Atex approval)
- Sensing tubes of copper, stainless steel or Teflon withstand extremely severe ambient conditions and high temperatures; it can be installed in Ex areas
- High level of functional dependability thanks to fully automatic sensing tube monitoring
- High-performance software: ADW HeatCalc for planning, ADW Config for configuration and maintenance
- EN 54-22 and UL/FM approved
ADW HeatCalc
ADW HeatCalc is an easy to use design tool that allows the designer to draw the proposed installation in isometric view on a PC. The HeatCalc tool then calculates the programming criteria based upon the desired response temperatures. The calculated values form part of the project report, which is used to programme the detector as part of the commissioning process.
Technical data
|
ADW 535-1
|
ADW 535-2
|
Supply voltage range
|
9V dc to 29V dc
|
9V dc to 29V dc
|
Power consumption (24V dc) Normal Operation
Self-test
|
35mA
210mA (for approximately 180 seconds)
|
43mA
230mA (for approximately 180 seconds)
|
Number of Sensing tubes
|
1
|
2
|
Sensing tube length (EN54-22 compliant)
|
1 x 115 metres
|
2 x 115 metres
|
Sensing tube monitoring
|
Automatic self-test monitors sensing tube for leaks or blockages.
|
Automatic self-test monitors sensing tube for leaks or blockages.
|
Interfaces Relay/o.C
Network/PC tool
Inputs
|
2 (Fire and Fault)
Ethernet
Reset, day/night mode, reference
|
4 (2 x Fire and 2 x Fault)
Ethernet
Reset, day/night mode, reference
|
Relay contacts
|
50V dc / 1A
|
50V dc / 1A
|
Standards EN54-22/FM 3210/UL 521
|
Classes A1I, A2I, BI, CI, DI, EI, FI, GI
|
Classes A1I, A2I, BI, CI, DI, EI, FI, GI
|
Operating temperature/humidity
Cable terminal
Sensing tubes
|
-25ºC to +70ºC / 95% RH
-40ºC to +300ºC / 100% RH (material dependant)
|
-25ºC to +70ºC / 95% RH
-40ºC to +300ºC / 100% RH (material dependant)
|
Housing Dimensions
Colour
Material, weight
Packaging
Protection type EN 60529
|
260mm 160mm 134mm (W x H x D)
Graphite black RAL 9011
Duroplast, approximately 2,100 grams
272mm x 238mm x 170mm (W x H x D)
IP66
|
260mm 160mm 134mm (W x H x D)
Graphite black RAL 9011
Duroplast, approximately2,500 grams
272mm x 238mm x 170mm (W x H x D)
IP66
|
Display and Operation LED
|
1 (green) operation, 1 (red) alarm, 1 (yellow) fault
|
1 (green) operation, 2 (red) alarm, 2 (yellow) fault
|
Event memory for analogue values Recording
|
>16m events (installed SD card)
Up to 1 year (installed SD card)
|
>16m events (installed SD card)
Up to 1 year (installed SD card)
|