Triple Infrared Hydrogen Detection

Triple Infrared Hydrogen Detection

Triple Infrared Hydrogen Detection

FlameSpec-IR3–H2 is the next generation of the IR3. It is being introduced to further enhance the protection and safety for those high risk and high value industries. The FlameSpec-IR3-H2 will detect hydrogen fires and explosions extremely fast, thus allowing preventative action to be initiated even more rapidly and minimizing the consequences!

Request A Quote
  • Overview
  • Resources

FlameSpec-IR3–H2 is the next generation of the IR3. It is  introduced to further enhance the protection and safety of those high risk and high value industries. The FlameSpec-IR3-H2 will detect hydrogen fires and explosions extremely fast, thus allowing preventative action to be initiated even more rapidly and minimizing the consequences! The unmatched detection times and distances are:

  • Detection within 40 milliseconds of fireballs or explosions 
  • 1.5s for 0.8m hydrogen fire at 0–20m
  • 4s for 0.8m hydrogen fire at 20–30m

 

The FlameSpec-IR3-H2 flame detector provides ultra-fast response, high performance, and reliable detection of hydrogen fires. It operates in all weather and light conditions with the highest immunity to false alarms. These features, along with the built-in event logger, provide additional means to study the cause and development of fire events for “lessons learned” reviews​.

FlameSpec-IR3–H2-HD has the addition of Integral HD quality video, with event recording, on top of the proven, superior capabilities of Triple IR (IR3) flame detection, providing a very powerful safety tool to protect personnel, plants, and processes. The detector's high-definition (HD) video output provides visualization of hydrogen flames that are invisible to the human eye. This allows the rescue team to be aware of the exact situation and location of invisible hydrogen flames before entering the hazardous area. The detector automatically records video of any fire event (1 minute pre- and up to 3 minutes post alarm initiation). These features, along with the built-in event logger, provide additional means to study the cause and development of fire events for “lessons learned” reviews 

Key Benefits:

FlameSpec-IR3-H2 and IR3-H2-HD:

  • Extreme sensitivity - up to 30m for a 32 inch Hydrogen Plume flame.  
  • Ultra-fast detection mode - detection within 40 milliseconds for Hydrogen fireballs or explosions Hydrogen flame detection.  
  • 1.5 second detection time - for 0.8m hydrogen plume fire at up to 20m distance.

  • Data/Event logger - alarms, faults and other relevant events are logged to non-volatile memory.  
  • Built-in-Test (BIT) - Automatic and manual self-test of window cleanliness and the overall operation of the detector.  
  • Window heater to avoid condensation and icing.  
  • Tilt mounting bracket can be connected either above or below the detector.  
  • High immunity to false alarm.

FlameSpec-IR3–H2-HD only:

  • HD video output with Automatic HD video recording of fire events. Visualization of hydrocarbon flames that are invisible to the human eye.  
  • Ethernet communication – in addition to the standard methods, such as Relays, 4-20mA and Modbus.

 

SPECIFICATIONS FlameSpec IR3H2 and IR3H2HD:

Detection time and distance: 

Detection within 40 milliseconds of fireballs or explosions 

1.5s for 32″ (0.8m) hydrogen fire at 0–20m

4s for 32″ (0.8m) hydrogen fire at 20–30m

Field of View: 90° Horizontal, 75° Vertical 

Time Delay: 0-30 seconds

Built in Test: Automatic and Manual

Operating Voltage: 24 Vdc nominal (18-32 Vdc)

Current Consumption: Standby: 120mA, Operation: 180mA all systems in operation (including window heater).

Electrical Entries: 2 x conduit entries 3/4" 14NPT or M25 x 1.5 Wiring 12-20 AWG (2.5–0.35mm2).

Relays:  Volt-free contacts rated 2A at 30 Vdc Alarm–normally open, Fault–normally closed.

Analogue Output: 0-20mA (stepped) current output 3 wire and 4 wire(isolated) configurations (sink and source), with HART overlay.

Local Indication: Tri-colour LED

Size: 140 x 90 x 90mm

Weight: Detector (Stainless Steel 316): 3.0kg Tilt mount (Stainless Steel 316): 1.5kg

Temperature Range: Operating: -55°C to +85°C Storage: -55°C to +85°C

Humidity: Up to 99% (RH), non-condensing

Ingress Protection: IP66 & 68 (2m, 24hr); NEMA 4X & 6P

Explosion proof:

ATEX: I I 2 G D Ex db IIC T5 Gb or Ex db eb IIC T5 Gb and Ex tb IIIC T95°C Db -55°C<Ta<75°C Ex db IIC T4 Gb or Ex db eb IIC T4 Gb and Ex tb IIIC T105°C Db -55°C<Ta<85°C

IECEx ExdbIICT5Gb-50°C≤Ta≤75°CExdbIICT4Gb-50°C≤Ta≤85°C

FM & FMC Class I, Div. 1, Groups B, C & D; T4 Class I, Zone 1, AEx/Ex db IIC T4 Gb T4-50°C≤Ta≤85°CT5-50°C≤Ta≤75°C 

Performance Approval:  ANSI FM 3260 EN 54 -10

Functional safety: SIL2, per I EC 61508

Marine Approval: DNV GL: Designed to meet standard DNVGL-CG-0339 for opendeck locations Temperature class D; Vibration Class A, B and C

 

SPECIFICATIONS FlameSpec IR3H2HD only:

Current Consumption: Standby: 180mA, Operation: 250mA all systems in operation (including window heater)

Size: 200 x 130 x 130mm

Weight: Detector (Stainless Steel 316): 4.4kg Tilt mount (Stainless Steel 316): 2.4kg

HD Video: Allows clear imaging of fire and people at 30m distance

Video recording: Alarm events 1 minute pre-event and up to 3 minutes post-event

System integration protocol: ONVIF (Open Network Video Interface Forum) Profile S

Digital Output (for video): IP network IEEE 802.3 10Base-t

Composite video output: NTSC or PAL

Files

FLS-IR3-H2-05.pdf Download File
FLS-IR3-H2-HD-04.pdf Download File

We’re here to help

Call 08000 314333